C*Pix SDC2000 Manual de instrucciones Pagina 90
- Pagina / 122
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
90 Ignite SDC/HDC Robotic Camera Instruction Manual
Appendix C — HD Camera Block
Super Gain Menu
The SUPER GAIN menu is shown in Figure 61. Menu selections are
described in Table 42.
Figure 61. SUPER GAIN Menu
Note These settings are performed when S.GAIN1, S.GAIN2 or S.GAIN3 has been
selected by GAIN SELECT.
Table 42. SUPER GAIN Menu Selections
Selection
Description
MODE
[S.GAIN1, S.GAIN2, S.GAIN3]
For selecting the S.GAIN storage table.
TOTAL GAIN [0 dB to 72 dB]
For displaying the total gain for GAIN, PIX MIX, V MIX and FRAME MIX.
GAIN [0 dB to 36 dB]
For setting the gain increase.
PIX MIX [OFF, +6 dB]
For setting the addition of horizontal pixels ON or OFF.
V MIX [OFF, +6 dB]
For setting the addition of vertical pixels ON or OFF.
FRAME MIX
[OFF, +6 dB to +24 dB]
For setting the gain increase based on accumulation in the CCD image
sensor. This setting does not take effect when MENU SEL is set to FILM
MENU and the 720/60p or 720/59.94p is selected as the FORMAT setting.
H DETAIL LEVEL [00 to 63]
For setting the H DETAIL level.
CRISP [00 to 31]
For setting the noise elimination level of the detail signals.
LEVEL DEPENDENT [0 to 15]
For removing the detail in the dark areas. The higher the number set, the
wider the range in which the detail is removed.
PEAK FREQUENCY [0 to 31]
For setting the H DTL peak frequency.
M GAMMA
[0.35 to 0.75 (DRS OFF)]
[–10 to +10 (DRS ON)]
For adjusting the gamma characteristics.
M PED OFFSET [–200 to +200]
For adjusting the amount of offset in the black level.
R PED OFFSET [–200 to +200]
For adjusting the amount of offset in the R pedestal.
B PED OFFSET [–200 to +200]
For adjusting the amount of offset in the B pedestal.
S. GAIN (1/2) S. GAIN1
MODE :S. GAIN1
TOTAL GAIN :42dB
GAIN :30dB
PIX MIX :+6dB
V MIX :+6dB
FRAME MIX :OFF
H DETAIL LEVEL :1
CRISP :00
LEVEL DEPENDENT :5
PEAK FREQUENCY :2
S. GAIN (2/2) S. GAIN1
M GAMMA :0.50
M PED OFFSET :+000
R PED OFFSET :+000
B PED OFFSET :+000
** **
** **
*
8492_53_r0
- Instruction Manual 1
- CERTIFICATE 2
- Contacting Grass Valley 4
- Contents 5
- About This Manual 9
- Standard Documentation 9
- Other Documentation 9
- Safety Summary 11
- Warnings 12
- Cautions 13
- Regulatory Notices 15
- Canadian Certified AC Adapter 16
- Certification 16
- Overview 17
- Hardware Description 18
- Optional Mounting Hardware 19
- Functional Description 19
- 8492_03_r0 20
- 8492_04_r0 21
- Section 1 — Overview 22
- Installation 23
- 492_05_r0 24
- 55 lb (29.95 kg) 25
- Section 2 — Installation 26
- 8492_08_r0 27
- Camera/Lens Assembly 28
- Prompter (Optional) 29
- System Interconnection 30
- Robotic Pan/Tilt Head 31
- Operation 33
- Flange back adjust ring 34
- 4. Start shooting 35
- Section 3 — Operation 36
- Troubleshooting 37
- Section 4 — Service 38
- Trou blesho oti ng 39
- SD (NTSC) Camera Block 41
- Menu Selections 42
- Setting by Camera 43
- 8492_13_r0 43
- Menu Item Setting 44
- Use mode 44
- Blinking 44
- Submenus Overview 45
- 8492_15_r0 45
- Color Setting 46
- 8492_17_r0 47
- 8492_18_r0 47
- 8492_19_r0 48
- User Mode Submenus Overview 50
- 8492_20_r0 50
- Color Settings 52
- 8492_21_r0 53
- 8492_22_r0 54
- 8492_23_r0 56
- 8492_24_r0 56
- 8492_25_r0 57
- SD (PAL) Camera Block 61
- 8492_28_r0 65
- 8492_29_r0 66
- 8492_30_r0 66
- Other Settings Overview 68
- 8492_33_r0 69
- 8492_34_r0 71
- G/L Adjustment Settings 72
- Detail Settings 72
- 8492_37_r0 73
- Other Settings 74
- Initial Settings 75
- 8492_39_r0 75
- 8492_40_r0 75
- 8492_41_r0 76
- HD Camera Block 79
- Figure 52. MAINTENANCE Menu 81
- Black Shading Menu 82
- Pedestal, Gamma Menu 82
- 8492_47_r0 84
- Knee, White Clip Menu 85
- R/B Gain Menu 86
- Detail Menu 87
- 8492_51_r0 88
- Gain, Auto Iris Menu 89
- R PED OFFSET [–200 to +200] 90
- B PED OFFSET [–200 to +200] 90
- S. GAIN (1/2) S. GAIN1 90
- Frame Mode Menu 91
- Matrix Menu 92
- Setting Menu 93
- 8492_57_r0 93
- Mode Menu 94
- Shutter Menu 96
- Gen-Lock Menu 97
- Pix Defect Menu 98
- 8492_64_r0 99
- Camera ID Menu 100
- File Operation Menu 101
- Time Code Menu 102
- White Balance Adjustment 103
- Black Balance Adjustment 103
- Specifications 105
- Appendix C — HD Camera Block 106
- Robotic (Pan/Tilt Head) 107
- Setting Soft Stops 109
- Glossary 111
- TTL (Through-the-Lens) 115
- Video Switcher 115
- 116 Ignite Glossary 116
- Numerics 117
© 2020, manymanuals.es. Todos los derechos reservados | 0.071 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales