C*Pix SDC2000 Instrucciones de operaciones descargar pdf (Pagina 267)

SDC 2002

4.9 Special Menu

4-181

Operating Instructions - Rev. 1 / 6.2003

3. SepMag

Coupling

Source

SepMag players can either be synchronized on BiPhase or Timecode signals

generated by the DataCine.

Audio Delay is set to ’Zero’ in case a SepMag player is coupled via Timecode

with the DataCine and the audio outputs from the player are connected to “Au-

dio In” of the SDC.

The audio output of the DataCine then has a correct timing to the video signal.

To modify, click on the key and select from the drop down menu. The current

setting is shown on the key display.

4.Timecode

Generator Out

Coupling

Biphase signals are generated internally by dividing down pulses coming from

the sprocket wheel.

Here the Biphase signal is used to synchronize external time code units (e.g.

keycode reader).

It can be switched between 2x Biphase (48/50Hz), 10x Biphase (240/250Hz)

and 1x Biphase (24/25Hz), referring to the TC GEN OUT connector of

Rack 2.

To find out the correct setting, check manual of connected device. To modify,

click on the key and select from the drop down menu. The current setting is

shown on the key display.

5. Editor Out

Coupling

Biphase signals are generated internally by dividing down pulses coming from

the sprocket wheel.

Here the Biphase signal is used to synchronize external editor units (e.g.

Pogle).

It can be switched between 2x Biphase (48/50Hz), 10x Biphase (240/250Hz)

and 1x Biphase (24/25Hz), referring to the Editor Out connector of Rack 2.

To find out the correct setting, check manual of connected device.

To modify, click on the key and select from the drop down menu.

The current setting is shown on the key display.

1 2 ... 262 263 264 265 266 267 268 269 270 271 272 ... 365 366

Sin comentarios

C*Pix SDC2000 Instrucciones de operaciones Pagina 267